LS10 Installation and Operating Guide
Version 1.01
Appendix E. LS10 Remote Command API
E-
5
Document #: 9301H66300 Ver. 1.01
Volume and Mute Commands
1. Master Volume Level
Command:
@
VOLUME
<space>
[+][-][Value]
<CR>
Operation
Response:
VOLUME
<space>
Level
<CR>
Read/Write
This is used to set or read the volume level.
Parameters
[+]
Add [Value] to current volume.
[-]
Subtract [Value] from current volume.
[Value]
Value to set the volume in negative tenths dB or, if +/- is used, it is the
value to increment or subtract from the current volume. The value
should be in increments of 5, or 0.5dB steps.
Omit this argument to only read the volume.
Returns
[Level]
Current volume level represented using the range of 0 (-0dB) to 700 (-
70.0 dB)
.
Example
Set the volume to -35dB
Send
@VOLUME 350<cr>
Receive:
VOLUME 350<cr>
Increase volume by 0.5dB
Send:
@5<cr>
Receive:
VOLUME 345<cr>
2. Master Volume Mute
Command:
@
MUTED
<space>
[value]
<CR>
Operation
Response:
MUTED
<space>
value
<CR>
Read/Write
Mute or Unmute the LS10 output.
Parameters
value
Selection
0 Unmute
1 Mute
+
Toggle the mute state
Example
Mute
Send:
@MUTED 1<cr>
Receive:
MUTED 1<cr>
