Datasat LS10 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 118

Datasat LS10 Скачать руководство пользователя страница 11

LS10 Installation and Operating Guide

Page 11

LS10 Installation & Operating Guide

Document # 9301H66300 Ver. 1.01

FACTORY WARRANTY INFORMATION

Products being returned under warranty should be sent to Datasat Digital Entertainment freight prepaid in
the original or equivalent packaging. Please contact Datasat Digital Entertainment prior to shipping any
parts or merchandise to receive a Return Merchandise Authorization number.

Datasat Digital Entertainment Customer Service

USA +1.818-531-0003

U.K +44(0) 1189.349.199

Fax: +1 886 448-6802

Datasat Digital Entertainment’s shipping address is:

Datasat Digital Entertainment
Attn: RMA #
4596 Ish Drive #210
Simi Valley, CA 93063
U.S.A.

Thank you for choosing Datasat Digital Entertainment!

Technical Support Contact Information

To contact Datasat Digital Entertainment’s Technical Support staff:

Telephone: +1.818.401.4253 or toll free in USA and Canada: 1(888) 428-2268

Customer Service:

[email protected]

Technical Support:

[email protected]

Software License Agreement

IMPORTANT: READ THIS SOFTWARE LICENSE ("LICENSE") CAREFULLY BEFORE USING THE
DATASAT DIGITAL ENTERTAINMENT SOFTWARE. THE SOFTWARE RESIDING ON THE LS10
AUDIO PROCESSOR AND ANY ACCOMPANYING MATERIALS (COLLECTIVELY, THE
“SOFTWARE”) ARE LICENSED, NOT SOLD. BY USING THE LS10 AUDIO PROCESSOR, YOU ARE
ACCEPTING AND AGREEING TO THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE TO THE
TERMS OF THIS LICENSE, DO NOT USE THE LS10 AUDIO PROCESSOR.

1. Grant. Subject to your compliance with the terms of this License, Datasat Digital Entertainment

hereby grants you a non-exclusive, conditional, non-transferable, revocable, limited license to use
the Software solely for your own personal private purposes and solely in connection with the LS10
Audio processor. All rights not expressly granted to you are reserved by Datasat Digital
Entertainment.

2. Ownership. All right, title and interest in and to the Software, all physical copies thereof and all

intellectual property embodied therein are and shall remain vested in Datasat Digital Entertainment.
You do not own the Software, physical copies thereof or any intellectual property embodied therein.

3. Restrictions. You may not (i) copy, distribute, sublicense, lease, transfer or use for external

purposes the Software; (ii) reverse engineer, decompile, disassemble, translate, modify, attempt to
reveal the source code of the Software, or (iii) create derivative works from the Software.

«
...
9
10
11
12
13
...
»

Содержание LS10























































































































Отзывы:

Нет отзывов