DATAPROCESS DSP 500, Руководство пользователя

Страница: 19 / 120

PAGE 12 UV119UE - DSP 500 : USER MANUAL- v. 4.0
PLU RECALL
The daily use of the DSP 500 Scale is based on the PLU, that is on pre-programmed prices.
Each PLU is marked by a numeric code, 1 up to 7 digits long (see function
23 PLU CODE LENGTH
).
Up to 3045 PLU can be stored without text (see progr. function
10 PLU EDIT
). If some text for
product description and, where needed, for ingredients is to be added, then the maximum number
of programmable PLU decreases. For example: using 350 characters for item description and
ingredients, the max. number of PLU lower to approximately 450.
Some of these PLU can be associated to the 99 direct recall keys available on the keyboard (see
progr. function
00 DIRECT PLU
).
Attention : the code number and the dedicated key number are NOT the same (Code
no. 59238 may correspond to key no. 27).
Note that codes 1 and 2 are used by the
Random Price
functions, and
therefore they cannot be used for PLU.
PLU can be recalled by the two ways reported hereunder:
•
directly, by pressing one of the 99 hot-shot keys (fast PLU recall) on the keyboard, if
programmed (see prog. funct.
00 HOT-SHOT KEYS
).
•
by using the numerical keys + the key <
PLU
> to confirm the entry. In
PLU RECALL
priority the confirmation may also be given without <
PLU
> key on time-out basis (see
progr. function
22 PLU TIME LIMIT
). Remember that codes 1 and 2 cannot be used.
With non-weighed item PLUs just enter the quantity by the numerical keys (if quantity is greater than
1).
When trying a recall for a non-programmed PLU, the message
NON AVAILABLE
is displayed.
Abort the request and press < C > to continue.
VARIATION OF PLU PRICE
Although making use of all the pre-set codes, the DSP 500 scale offers the possibility to enter a
temporary price variation and keep the PLU description and information at the same time.
SP
SPECIAL PRICE
To change a price associated to a PLU press < SP > (Special Price). The new
price must be higher or equal to the minimum price programmed for that PLU.
Attention! The above function can be selected provided that the
following conditions are present:
•
It has been enabled by progr. function
25 OPERATION SETTINGS
•
The function “price revision” was enabled when programming the
recalled PLU (see progr. funct.
10 PLU EDIT
).
DISCOUNTS
pre-set by quantity
pre-set on single PLUs
free on total amounts
In addition to Special Prices, a PLU unit price can be set to 3 different
amounts, with each amount being automatically used if weight of
quantity is above one of the two thresholds, thus providing
“weight/quantity-based” discount capabilities. The thresholds for
automatic discounts can be specified for each PLU (see funct.
10 PLU
EDIT
).
Discounts can also be provided on a fixed base for each PLU (see funct.
10 PLU EDIT
) or freely on the total amount of a receipt (see
SUB-
TOTAL AND DISCOUNTS
).