DATAPROCESS DSP 500, Руководство пользователя

Страница: 66 / 120

PAGE 20 UV119UE - DSP 500 : USER MANUAL- v. 4.0
1 -
13 - PLU TEST
F
+ +
1 3
ACCESS FROM LEVEL:
testing the number of stored PLU and the available PLU
This function can be used to quickly check the number of PLU already been programmed and these
still available for programming, by displaying these two figures on the display without printing
them.
If a printout of all the programmed PLU is needed, then see at progr. functions
71 PLU LIST
and
72 PLU BAR-CODE LIST
, to obtain a printout of PLU complete with their codes, description and
unit price.
When selecting this function the following message is displayed:
1 3 P L U T E S T
Then press
<ENTER>
to visualise the no. of PLU already programmed so far, and the space still
available for further PLU programming as follows:
1 3 P L U S T O R E D x x x x
P L U L E F T z z z z
where:
xxxx = no. of stored PLU (including PLU 1 and 2, scale pre-set)
zzzz = no. of PLU available for programming
Use the keys
<EXIT> or <ENTER> to exit the function.