DATAPROCESS DSP 500, Руководство пользователя

Страница: 70 / 120

UV119UE - DSP 500 : USER MANUAL - v. 4.0 PAGE 63
2 - 21 - NUM. KEY TIME-
OUT
F
+ +
2 1
ACCESS FROM LEVEL:
setting time limit for numeric key entry
This function allows to pre-set a time-out for numeric key entry - that is a programmed timing
between entering one figure and the following one. That time due, the scale shall consider the first
figure been selected as the beginning of a new price. Value “0” indicates that no time limit was set.
Enter the function and then press <ENTER> to access programming as follows:
2 1 N U M . K E Y T I M E - O U T
E X P R E S S E D I N s e c . s s
where:
ss
= time-out value expressed into seconds
Input the new value through the numerical keypad for changing a pre-set time limit. Press
<ENTER>
to confirm the entered data and restore the previous condition.
22 - AUTO PLU TIME-OUT 2 -
F
+ +
2 2
ACCESS FROM LEVEL:
setting a time-out for automatic end of PLU code entering
A time-out for PLU code entries through numerical keypad can be set by this function - that is a
programmed timing between entering one PLU code and the following one. That time due, the
scale shall consider the first figure been selected as completed, even if
<PLU>
key was not pressed.
Value “0” indicates that no time limit was set.
Enter the function and then press <ENTER> to access programming, as follows:
2 2 A U T O P L U T I M E - O U T
E X P R E S S E D I N 1 / 10 s s
where:
ss
= time-out value expressed into tenths of second
Input the new value through the numerical keypad for changing a pre-set time limit, and then
confirm by
<ENTER>
and restore the previous condition.