Getting started
2-15
User’s Guide for the Magna™ Class Printer
3
Grasp the ribbon cartridge handle, and lift up to remove the
ribbon cartridge (see
Figure 2-14
).
Figure 2-14: Remove the print ribbon cartridge
♦
Load the print ribbon
1
If used print ribbon is in the printer, remove the used ribbon and
used ribbon spool from the ribbon cartridge shafts.
The print ribbon has a negative image of the information printed
on the card. Dispose of print ribbon according to your policy for
protecting the data that might be visible on it.
2
Unwrap the new print ribbon.
3
Slide the full supply roll onto the left ribbon cartridge shaft (see
Figure 2-15
).
4
Slide the empty take-up ribbon spool onto the right ribbon
cartridge shaft. Leave very little slack in the ribbon between the
ribbon cartridge shafts (see
Figure 2-15
).
Ribbon take-up
Ribbon supply
i
MagnaUserGuide.book Page 15 Friday, May 5, 2000 1:09 PM
