Troubleshooting
6-17
User’s Guide for the Magna™ Class Printer
8
Remove the card output stacker from the printer and place it in
the accessories box (step 1 in
Figure 6-4
or
Figure 6-5
).
9
Place the foam shipping support in the printer carton.
10 Place the plastic bag around the printer and close it.
11 Place the protective box for your printer model:
–
For models M and M2, place the protective box in the
shipping carton with the closed end of the box toward the
printer (step 2 in
Figure 6-4
).
–
For models ML and M2L, place the open end of the protective
box over the output end of the printer (step 2 in
Figure 6-5
).
Figure 6-4: Pack and M or M2 printer for shipping
12 Place the printer in the shipping carton (step 3 in
Figure 6-4
or
Figure 6-5
). Make sure the foam supports align with the hinge
area on top of the printer.
13 Place the accessories box along the end of the shipping cushion,
near the front of the printer (step 4 in
Figure 6-4
or
Figure 6-5
).
If you are transporting the printer to another location for use, be
sure to pack the User’s Guide, the card output stacker, the
interface cable, the power cord, any smart card serial cables,
3
1
4
6
6
2
5
i
MagnaUserGuide.book Page 17 Friday, May 5, 2000 1:09 PM
