2-10
Getting started
User’s Guide for the Magna™ Class Printer
Figure 2-7: Connect the printer cables
2
If your printer has a smart card module, the ports to use
correspond to the module installed:
–
The lower port (step 3 in
Figure 2-7
) is for a contact smart
card module or a contact station.
–
The upper port (step 2 in
Figure 2-7
) is for a contactless
module.
–
Both ports are installed for a module containing both
contactless
(upper port) and contact couplers (lower
port).
If the printer includes a smart card module, the printer’s smart
card serial port is connected to the PC using a smart card serial
cable. The cable must be a shielded DB9 serial cable, up to a
maximum of 3 meters long.
If the PC has more than one serial port, attach the serial cable to
the serial port for the smart card application. See information with
your smart card application for the correct port to use.
Verify that serial port settings are correct using the steps in
“PC
settings” on page C-1
.
1
4
5
1
2
2
3
3
i
!
MagnaUserGuide.book Page 10 Friday, May 5, 2000 1:09 PM
