background image

 

MB-240X Wheel Balancer 

4

 

P/N 5900262 — Rev. A1 — Jan. 2021 

 

Shipping Information 

Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect 
the shipment 

before

 you sign to acknowledge that you received it. 

When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good 
condition. 

Do not sign the bill of lading until after you have inspected the shipment.

 If 

any of the items listed on the bill of lading are missing or damaged, do not accept the shipment until 

the carrier makes a notation on the bill of lading that lists the missing or damaged goods. 

If you discover missing or damaged goods 

after

 you receive the shipment and have signed the bill of 

lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not 
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a 

specific date) and that the carrier has failed to comply with your request. 
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this 

happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of 
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you 

process your claim does not make us responsible for collection of claims or replacement of lost or 
damaged materials. 

Safety Considerations 

Read this manual carefully before using your new product.

 Do not set up or operate 

the product until you are familiar with all operating instructions and warnings. Do not allow anyone else 
to operate the product until they are also familiar with all operating instructions and warnings. 

Safety Information 

Please note the following: 

 

The product is a Wheel Balancer. 

Use it only for its intended purpose.

 

 

The product should only be operated by authorized personnel. Keep children and untrained 

personnel away from the product. 

 

When using the product, wear appropriate work clothes (

nothing loose

) and ANSI-approved safety 

goggles (or similar). Keep hair, jewelry, ties and clothing away from the Balancer. 

 

When a Wheel is spinning, keep away from it. 

 

Do not use the product while tired or under the influence of drugs, alcohol, or medication. 

 

Do not use the product in the presence of cigarette smoke, dust, or flammable liquids or gases. 

Use the product indoors in a well-ventilated area. 

 

Do not make any modifications to the product; this voids the warranty and increases the chances 

of injury or property damage

.

 

 

Make sure all operators read and understand the 

Installation and Operation Manual

. Keep the 

manual near the device at all times. 

 

Make a visual inspection of the product before using it each time. Do not use the product if you 

find any missing or damaged parts. Instead, take the unit out of service, then contact an authorized 
repair facility, your distributor, or 

Dannmar Products at

 (877) 432-6627

 

Dannmar recommends making a 

thorough

 inspection of the product once a month. Replace any 

damaged or severely worn parts, decals, or warning labels. 

 

Содержание MB-240X





























































Отзывы: