Illustration 5.18: USB connection.
PC Software - MCT 10
All drives are equipped with a serial communication port. We provide a PC tool for communication
between PC and frequency converter, VLT Motion Control Tool MCT 10 Set-up Software.
MCT 10 Set-up Software
MCT 10 has been designed as an easy to use interactive tool for setting parameters in our fre-
quency converters.
The MCT 10 Set-up Software will be useful for:
•
Planning a communication network off-line. MCT 10 contains a complete frequency con-
verter database
•
Commissioning frequency converters on line
•
Saving settings for all frequency converters
•
Replacing a drive in a network
•
Expanding an existing network
•
Future developed drives will be supported
MCT 10 Set-up Software support Profibus DP-V1 via a Master class 2 connection. It makes it
possible to on line read/write parameters in a frequency converter via the Profibus network. This
will eliminate the need for an extra communication network.
5. How to Install
VLT
®
HVAC Drive Design Guide
104
MG.11.B2.02 - VLT
®
is a registered Danfoss trademark
5
Содержание VLT series
Страница 78: ...4 How to Order VLT HVAC Drive Design Guide 78 MG 11 B2 02 VLT is a registered Danfoss trademark 4...
Страница 120: ...7 RS 485 Installation and Set up VLT HVAC Drive Design Guide 120 MG 11 B2 02 VLT is a registered Danfoss trademark 7...
Страница 152: ...8 Troubleshooting VLT HVAC Drive Design Guide 152 MG 11 B2 02 VLT is a registered Danfoss trademark 8...