Danfoss VLT HVAC, Руководство по программированию

Страница: 16 / 99

The FC101 Start-up Wizard for Open Loop Applications
No & Name Range Default Function
0-03 Regional Settings [0] International
[1] US 0
1-20 Motor Power 0.12-110kW/0.16-150hp Size related Enter motor power from nameplate data
1-22 Motor Voltage 50.0 - 1000.0V Size related Enter motor voltage from nameplate data
1-23 Motor Frequency 20.0 - 400.0Hz Size related Enter motor frequency from nameplate data
1-24 Motor Current 0.01 - 10000.00A Size related Enter motor current from nameplate data
1-25 Motor Nominal Speed 100.0 - 9999.0 RPM Size related Enter motor nominal speed from nameplate data
4-12 Motor Speed Low Limit [Hz] 0.0 - 400 Hz 0 Hz Enter the minimum limit for low speed
4-14 Motor Speed High Limit [Hz] 0.0 - 400 Hz 65 Hz Enter the maximum limit for high speed
3-41 Ramp 1 Ramp up Time 0.05 - 3600.0 s Size related Ramp up time from 0 to rated motor frequency par. 1-23
3-42 Ramp 1 Ramp Down Time 0.05 - 3600.0 s Size related Ramp down time from rated motor frequency par. 1-23 to
0
1-73 Flying Start [0] Disabled
[1] Enabled 0 Select Enable to enable the frequency converter to catch a
spinning motor i.e. fan applications
6-19 Terminal 53 mode [0] Current
[1] Voltage 1 Select if terminal 53 is used for current- or voltage input
6-10 Terminal 53 Low Voltage 0-10V 0.07V Enter the voltage that corresponds to the low reference
value
6-11 Terminal 53 High Voltage 0-10V 10V Enter the voltage that corresponds to the high reference
value
6-12 Terminal 53 Low Current 0-20mA 4 Enter the current that corresponds to the low reference
value
6-13 Terminal 53 High Current 0-20mA 20 Enter the current that corresponds to the high reference
value
3-02 Minimum Reference -4999-4999 0 The minimum reference is the lowest value obtainable by
summing all references
3-03 Maximum Reference -4999-4999 50 The maximum reference is the lowest obtainable by
summing all references
5-40 Function Relay [0] Function
relay
See 5-40 Function Relay Alarm Select the function to control output relay 1
5-40 Function Relay [1] Function
relay
See 5-40 Function Relay Drive running Select the function to control output relay 2
1-29 Automatic Motor Adaption
(AMA)
See 1-29 Automatic Motor
Adaption (AMA)
Off Performing an AMA optimizes motor performance
How to Programme VLT HVAC Basic Drive Programming Guide
MG.18.B1.02 - VLT
®
is a registered Danfoss trademark 15
2 2