Danfoss VLT HVAC, Руководство по программированию

Страница: 84 / 99

5.1.4 2-** Brakes
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
2-0* DC-Brake
2-00
DC Hold/Motor Preheat Current 50.0 % All set-ups TRUE 0 uint_16
2-01 DC Brake Current 50.0 % All set-ups TRUE 0 uint_16
2-02 DC Braking Time 10.0 s All set-ups TRUE -1 uint_16
2-04 DC Brake Cut In Speed 0.0 Hz All set-ups TRUE -1 uint_16
2-1* Brake Energy Funct.
2-16
AC Brake, Max current 100.0 % All set-ups TRUE -1 Uint16
2-17 Over-voltage Control [2] Enabled All set-ups TRUE - Uint8
5.1.5 3-** Reference/Ramps
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
3-0* Reference Limits
3-02
Minimum Reference 0.0 ReferenceFeedbackUnit All set-ups TRUE -3 Int32
3-03 Maximum Reference 50.0 ReferenceFeedbackUnit All set-ups TRUE -3 Int32
3-1* References
3-10
Preset Reference 0.0 % All set-ups TRUE -2 Int16
3-11 Jog Speed [Hz] 5.0 Hz All set-ups TRUE -1 uint_16
3-14 Preset Relative Reference 0.0 % All set-ups TRUE -2 Int16
3-15 Reference 1 Source [1] Analog in 53 All set-ups TRUE - Uint8
3-16 Reference 2 Source [2] Analog in 54 All set-ups TRUE - Uint8
3-17 Reference 3 Source [11] Local bus reference All set-ups TRUE - Uint8
3-4* Ramp 1
3-41
Ramp 1 Ramp up Time ExpressionLimit All set-ups TRUE -2 uint_32
3-42 Ramp 1 Ramp Down Time ExpressionLimit All set-ups TRUE -2 uint_32
3-5* Ramp 2
3-51
Ramp 2 Ramp up Time ExpressionLimit All set-ups TRUE -2 uint_32
3-52 Ramp 2 Ramp down Time ExpressionLimit All set-ups TRUE -2 uint_32
3-8* Other Ramps
3-80
Jog Ramp Time ExpressionLimit All set-ups TRUE -2 uint_32
3-81 Quick Stop Ramp Time ExpressionLimit 1 set-up TRUE -2 uint_32
Parameter Lists VLT HVAC Basic Drive Programming Guide
MG.18.B1.02 - VLT
®
is a registered Danfoss trademark 83
5 5