![background image](http://html1.mh-extra.com/html/danfoss/vlt-brook-crompton-motor-fcm-300/vlt-brook-crompton-motor-fcm-300_design-manual_3509314020.webp)
2.2.1 Handling the FC Motor
Handling and lifting of VLT DriveMotors (FC motors) must
only be undertaken by qualified personnel. Full product
documentation and operating instructions must be
available together with tools and equipment necessary for
safe working practice. Eyebolts and/or lifting trunnions
supplied with the FC motor are designed to support only
the weight of the FC motor, not the weight of the FC
motor and any aucillary equipment attached to it. Be
absolutely sure that cranes, jacks, slings and lifting beams
are capable of carrying the weight of equipment to be
lifted. Where an eyebolt is provided with the motor, this
should be screwed down until its shoulder is firmly against
the face of the stator frame to be lifted.
FCM type
Approx. weight [kg]
FCM 305
11
FCM 307
13
FCM 307
17
FCM 315
20
FCM 322
26
FCM 330
28
FCM 340
37
FCM 355
56
FCM 375
61
Table 2.10 Weight
2.2.2 Bearings
The standard solution is fixed bearing in the drive side of
the motor (shaft output side).
To avoid static indention, the storage area should be
vibration free. Where exposure to some vibration is
unavoidable, the shaft should be locked. Bearings may be
fitted with a shaft locking device which should be kept in
place during storage. Shafts should be rotated by hand,
one quarter of a revolution, at weekly intervals. Bearings
are despatched from the works fully charged with lithium
based grease.
Frame size
Lubrication type
Temperature range
80-132
Esso unirex N3
-30°C to + 140°C
Table 2.11 Lubrication
Maximum hours bearing life (Lna) expected at 80° C bearing temp. x 10
3
hours.
FCM
3000 min
-1
1500 min
-1
Horiz.
Vert.
Horiz.
Vert.
305-315
30
30
30
30
322-340
355-375
Lna bearing life is the adjusted, L10 life rating, taking account of: -Reliability -Material improvement -Lubrication conditions.
Table 2.12 Bearing Life
FCM
Bearings
Oil seals - Bore x O/D x width in mm
Drive end
Non-drive end
Drive end
Non-drive end
305-307
6204ZZ
6003ZZ
20x30x7
17x28x6
311-315
6205ZZ
6003ZZ
25x35x7
17x28x6
322-330
6206ZZ
6005ZZ
30x42x7
25x37x7
340
6206ZZ
6005ZZ
30x42x7
25x37x7
355-375
6208ZZ
6005ZZ
40x52x7
25x37x7
Table 2.13 Standard Bearing References and Oil Seals
Installation
VLT
®
DriveMotor FCM Series
18
MG03BA02 - VLT
®
is a registered Danfoss trademark
2
2
Содержание VLT Brook Crompton Motor FCM 300
