![background image](http://html1.mh-extra.com/html/danfoss/vlt-brook-crompton-motor-fcm-300/vlt-brook-crompton-motor-fcm-300_design-manual_3509314034.webp)
However, some parameters will be "missing",
depending on the choice of configuration
(parameter 100), e.g. open loop hides all the PID
parameters.
In addition to having a name, each parameter is linked up
with a number which is the same regardless of the
programming mode. In the Menu mode, the parameters
are divided into groups, with the first digit of the
parameter number (from the left) indicating the group
number of the parameter in question.
Regardless of the mode of programming, a change of a
parameter will take effect and be visible both in the Menu
mode and in the Quick menumode.
3.1.12 Quick Setup via Quick Menu
The Quick Setup starts with pressing the [Quick Menu] key,
which brings out the following read-out on the display:
50.0 Hz
SETUP
1
QUICK MENU X OF Y
001 LANGUAGE
ENGLISH
At the bottom of the display, the parameter number and
name are given together with the status/value of the first
parameter under Quick Setup. The first time the [Quick
Menu] key is pressed after the unit has been switched on,
the read-outs will always start at pos. 1 - see
3.1.13 Parameter Selection
The selection of parameter is effected by means of the
[+]/[-] keys. The following parameters are accessible:
Pos.: No.:
Parameter:
Unit:
1
001
Language
2
200
Direction of rotation
3
101
Torque characteristic
4
204
Min. reference
[Hz]
5
205
Max. reference
[Hz]
6
207
Ramp up time
[s]
7
208
Ramp down time
[s]
8
002
Local/remote control
9
003
Local reference
Pos.: No.:
Parameter:
Unit:
10
500
Bus address
Table 3.6 Parameter Selection
3.1.14 Menu Mode
The Menu mode is started by pressing the [Menu] key,
which produces the following read-out on the display:
50.0 Hz
FREQUENCY
0 KEYB.&DISPLAY
Illustration 3.8
Line 3 on the display shows the parameter group number
and name.
3.1.15 Parameter Groups
In the Menu mode the parameters are divided into groups.
Selection of parameter group is effected by means of the
[<][>] keys.
The following parameter groups are accessible:
Group no.
Parameter group
0
Operation & Display
1
Load & Motor
2
References & Limits
3
Inputs & Outputs
4
Special functions
5
Serial communication
6
Technical functions
*For information on parameter group 800 and 900 for PROFIBUS,
please see the FCM Profibus manual MG03EXYY.
Table 3.7
Programming
VLT
®
DriveMotor FCM Series
32
MG03BA02 - VLT
®
is a registered Danfoss trademark
3
3
Содержание VLT Brook Crompton Motor FCM 300
