Danfoss VLT AQUA Drive FC 202, Руководство по эксплуатации

Страница: 75 / 174

6.6.3 Restoring Factory Default Settings Using the Recommended Initialization
Context:
NOTICE
LOSS OF DATA
Restoring default settings results in a loss of programming, motor data, localization, and monitoring records.
-
To create a back-up, upload data to the LCP before initialization. See 6.6.2 Uploading and Downloading Parameter Settings .
1. Press [Main Menu] twice to access parameters.
2. Go to
parameter 14-22 Operation Mode and press [OK].
Parameter 14-22 Operation Mode does not reset the following settings:
• Running hours.
• Serial communication options.
• Personal menu settings.
• Fault log, alarm log, and other monitoring functions.
3. Scroll to Initialization and press [OK].
4. Remove power to the unit and wait for the display to turn off.
5. Apply power to the unit. Default parameter settings are restored during start-up. Start-up takes slightly longer than normal.
6. After
alarm 80, Drive initialized appears, press [Reset].
6.6.4 Restoring Factory Default Settings Using Manual Initialization
Context:
NOTICE
LOSS OF DATA
Restoring default settings results in a loss of programming, motor data, localization, and monitoring records.
-
To create a back-up, upload data to the LCP before initialization. See 6.6.2 Uploading and Downloading Parameter Settings .
Procedure
1. Remove power to the unit and wait for the display to turn off.
2. Press and hold [Status], [Main Menu], and [OK] simultaneously while applying power to the unit (approximately 5 s or until an
audible click sounds and the fan starts).
Manually initializing does not reset the following parameter settings:
•
Parameter 15-00 Operating Hours
• Parameter 15-03 Power Up's
• Parameter 15-04 Over Temp's
• Parameter 15-05 Over Volt's
Start-up takes slightly longer than normal.
Starting the Drive
Operating Guide | VLT® AQUA Drive FC 202
AQ275652274277en-000101 / 130R0708| 73
Danfoss A/S © 2020.01