Danfoss VLT AQUA Drive FC 202, Руководство по эксплуатации

Страница: 140 / 174

When using a contactor with a DC coil inside with STO, it is important to make a return way for the current from the coil when turning
it off. The return way can be created by using a freewheel diode (or, alternatively, a 30 V or 50 V MOV for quicker response time) across
the coil. Typical contactors can be bought with this diode.
9.6.3 Analog Inputs
Number of analog inputs 2
Terminal number 53 (201), 54 (202)
Modes Voltage or current
Mode select Switch A53 (S201) and switch A54 (S202)
Voltage mode Switch A53 (S201)/A54 (S202) = OFF (U)
Voltage level -10 V to +10 V (scaleable)
Input resistance, R
i
Approximately 10 kΩ
Maximum voltage ±20 V
Current mode Switch A53 (S201)/A54 (S202) = ON (I)
Current level 0/4 to 20 mA (scaleable)
Input resistance, R
i
Approximately 200 Ω
Maximum current 30 mA
Resolution for analog inputs 10 bit (+ sign)
Accuracy of analog inputs Maximum error 0.5% of full scale
Bandwidth 100 Hz
The analog inputs are galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
Mains
Functional
isolation
PELV isolation
Motor
DC-bus
High
voltage
Control
+24 V
RS485
18
37
e
3
0
b
a
1
1
7
.1
1
Illustration 52: PELV Isolation
9.6.4 Pulse/encoder Inputs
Programmable pulse/encoder inputs 2/1
Terminal number (pulse)
29 (1) , 33
Terminal number (encoder)
32, 33
(2)
Maximum frequency at terminals 29, 32, 33 110 kHz (Push-pull driven)
Maximum frequency at terminals 29, 32, 33 5 kHz (Open collector)
Maximum frequency at terminals 29, 32, 33 4 Hz
Voltage level See Digital Inputs .
Specifications
Operating Guide | VLT® AQUA Drive FC 202
AQ275652274277en-000101 / 130R0708
138 | Danfoss A/S © 2020.01