Danfoss VLT AQUA Drive FC 202, Руководство по эксплуатации

Страница: 102 / 174

Status
799RPM 7.83A 36.4kW
0.000
53.2%
1(1)
Auto
Hand
Off
Remote
Local
Ramping
Stop
Running
Jogging
.
.
.
Stand-by
e
3
0
b
b
0
3
7
.1
2
1
2
3
1 Operating mode. Refer to
8.3.2 Status Messages - Operating
Mode .
3 Operation status. Refer to
8.3.4 Status Messages - Operation
Status .
2 Reference site. Refer to
8.3.3 Status Messages - Reference
Site .
Illustration 49: Status Display
8.3.2 Status Messages - Operating Mode
Table 39: Operating Mode
Operating
mode
Description
Off The drive does not react to any control signal until [Auto On] or [Hand On] is pressed.
Auto The drive requires external commands to execute functions. The start/stop commands are sent via the control ter-
minals and/or the serial communication.
Hand The navigation keys on the LCP can be used to control the drive. Stop commands, reset, reversing, DC brake, and
other signals applied to the control terminals override local control.
8.3.3 Status Messages - Reference Site
Table 40: Reference Site
Reference site Description
Remote The speed reference is given from:
•
External signals.
• Serial communication.
• Internal preset references.
Local The drive uses reference values from the LCP.
Maintenance, Diagnostics, and
Troubleshooting
Operating Guide | VLT® AQUA Drive FC 202
AQ275652274277en-000101 / 130R0708
100 | Danfoss A/S © 2020.01