Danfoss VLT AQUA Drive FC 202, Руководство по эксплуатации

Страница: 70 / 174

6.3 Programming the Drive
6.3.1 Parameter Overview
Parameters contain various settings that are used to configure and operate the drive and motor. These parameter settings are
programmed into the local control panel (LCP) through the different LCP menus. For more detail on parameters, see the programming
guide.
Parameter settings are assigned a default value at the factory, but can be configured for their unique application. Each parameter has a
name and number that remain the same regardless of the programming mode.
In the Main Menu mode, the parameters are divided into groups. The 1
st
digit of the parameter number (from the left) indicates the
parameter group number. The parameter group is then broken down into subgroups, if necessary. For example:
Table 15: Example of Parameter Group Hierarchy
Example Description
0–** Operation/Display Parameter group
0–0* Basic Settings Parameter subgroup
Parameter 0-01 Language Parameter
Parameter 0-02 Motor Speed Unit Parameter
Parameter 0-03 Regional Settings Parameter
6.3.2 Parameter Navigation
Use the following LCP keys to navigate through the parameters.
• Press [
▲
] [
▼
] to scroll up or down.
• Press [ ◄ ] [ ► ] to shift a space to the left or right of a decimal point while editing a decimal parameter value.
• Press [OK] to accept the change.
• Press [Cancel] to disregard the change and exit edit mode.
• Press [Back] twice to show the status view.
• Press [Main Menu] once to go back to the main menu.
6.3.3 Entering System Information
Context:
The following steps are used to enter basic system information into the drive. Recommended parameter settings are intended for start-
up and checkout purposes. Application settings vary.
Although these steps assume that an induction motor is used, a permanent magnet motor can also be used. For more information on
specific motor types, see the product-specific programming guide.
Starting the Drive
Operating Guide | VLT® AQUA Drive FC 202
AQ275652274277en-000101 / 130R0708
68 | Danfoss A/S © 2020.01