manualshive.com logo in svg
background image

Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and
electric components. We specialize in providing state-of-the-art technology and solutions
that excel in the harsh operating conditions of the mobile off-highway market as well as the
marine sector. Building on our extensive applications expertise, we work closely with you to
ensure exceptional performance for a broad range of applications. We help you and other
customers around the world speed up system development, reduce costs and bring vehicles
and vessels to market faster.

Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile
electrification.
Go to www.danfoss.com for further product information.

We offer you expert worldwide support for ensuring the best possible solutions for
outstanding performance. And with an extensive network of Global Service Partners, we also
provide you with comprehensive global service for all of our components.

Local address:

Danfoss 

Power Solutions GmbH & Co. OHG

Krokamp 35

D-24539 Neumünster, Germany

Phone: +49 4321 871 0

Danfoss 

Power Solutions ApS

Nordborgvej 81

DK-6430 Nordborg, Denmark

Phone: +45 7488 2222

Danfoss 

Power Solutions (US) Company

2800 East 13th Street

Ames, IA 50010, USA

Phone: +1 515 239 6000

Danfoss 

Power Solutions Trading

(Shanghai) Co., Ltd.

Building #22, No. 1000 Jin Hai Rd

Jin Qiao, Pudong New District

Shanghai, China 201206

Phone: +86 21 2080 6201

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

©

 Danfoss | March 2023

AQ404281942428en-000103

Products we offer:

Cartridge valves

DCV directional control

valves

Electric converters

Electric machines

Electric motors

Gear motors

Gear pumps

Hydraulic integrated

circuits (HICs)

Hydrostatic motors

Hydrostatic pumps

Orbital motors

PLUS+1

®

 controllers

PLUS+1

®

 displays

PLUS+1

®

 joysticks and

pedals

PLUS+1

®

 operator

interfaces

PLUS+1

®

 sensors

PLUS+1

®

 software

PLUS+1

®

 software services,

support and training

Position controls and

sensors

PVG proportional valves

Steering components and

systems

Telematics

Hydro-Gear

www.hydro-gear.com
Daikin-Sauer-Danfoss

www.daikin-sauer-danfoss.com 

Содержание PLUS+1 Compliant









































Отзывы: