Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 38

Страница: 38 / 182

Swimming Mode Operation

Lengths

If the operator has not configured the console with an event order, it is pertinent that

the correct number of lengths be set for the race being timed. Press

[LENGTHS]

followed

by the number of lengths to be completed using

[0-9]>[ENTER]

. Every time the swimmer

goes from one end of the pool to the other is a length. To figure out the correct number

of lengths, divide the distance of the race by the length of the pool. Example: a 200 yard

race in a 25 yard pool (200/25=8), Lengths = 8. The maximum number of lengths that the

OmniSport 2000 console will time is 66.

Reset

When a race is complete, the operator presses

[RESET]>[ENTER]

to reset the timer.

Note:

If the operator has not pressed

[STORE PRINT]

before resetting the timer, pressing

[RESET]

will store the race and print the results in addition to resetting the clock.

If the timer was not reset before the start of the next race, refer to

Always Ready Start

(p.34)

Menu

Press

[MENU]

to access additional functions and settings in the console.

Section 5:

Swimming Mode Menus & Settings (p.41)

describes the menus in swimming and how to

navigate them.

Touch

Use the touch keys during a race to adjust lengths count for a lane. This keeps the timer’s

internal length count correct if there is a missed split time or an accidental touch. To

make the changes to the desired lane, press

[+ TOUCH]

[- TOUCH]

followed by the

specific

[LANE ON/OFF]

key (or the lane number on the numeric keypad) and press

[ENTER]

Examples of when to use the touch keys:
• Missed touchpad on a split; press

[+ TOUCH]>[LANE ON/OFF]

for the desired lane

• A swimmer in the water got out late during a relay and triggered the touchpad.

If the operator caught it right away,

[SPLIT ARM]

would have been pressed. If the

arming delay has counted down and the lane is armed for the next touch, press

[- TOUCH]>[LANE ON/OFF]

for the desired lane.

Edit

The function of

[EDIT]

depends on whether the time is reset, or if the clock is counting.

If the Timer is Reset

With the timer reset, press

[EDIT]

to bring up the Edit Start

Menu on the right LCD. The Time of Day for the last start

received will be displayed. Verify that is the correct start time

and press

[ENTER]

, or use the numeric keypad to input the

correct Time of Day and press

[ENTER]

Examples of when to use

Edit

when the console is Reset:

• The console was reset accidently and the race was still going on.
• If two OmniSport 2000 consoles are being used in parallel and one timer either missed

the start, or it was accidently turned off, a start Time of Day could be read from the

printout on the other console.

START EDIT
02:23:14.500 *

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды