Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 139

Страница: 139 / 182

Track Mode Menus & Settings

129

Use

[←][→]

to toggle the setting from

N.O.

N.C.

and then press

[ENTER]

to save.

Note:

Normally Open (N.O.) is the standard setting for Daktronics timing accessories

with the OmniSport 2000 timer and is selected by default.

Primary Time

This menu will configure the console for which timing input(s)

to use as the primary time.

MENU-TIMER
INPUT= J7 1BTN*

From Main Menu – [4]>[1]>[3]

MENU-TIMER
INPUT= J10 3BTN*

Primary Time is used to tell the timer to use the

J7 SWITCH INPUTS

jack and 1 button per

lane for up to 8 lanes, or to use the

J10 NEAR END

jack 1, 2, or 3 buttons for up to 10 lanes.

Press

[←][→]

to toggle between settings:

• Input: J7 - 1 button
• Input: J10 - 1 button, 2 buttons, or 3 buttons
Press

[ENTER]

to save or press

[CLEAR]

to exit without saving.

Note:

When three buttons are used, final times are printed when the middle time is

received. If two buttons are being used, the time of the second button is printed

after both buttons are pressed. If one button is used, that is the time. In non-lane

events, only one button for lane one is used for all racers.

Precision

This menu tells the timer if it should report and display the

times to one hundredth (1/100) or one thousandth (1/1000)

of a second.

MENU-TIMER
PREC: 1/100 *

From Main Menu – [4]>[1]>[4]

Use

[←][→]

to select between

1/100

1/1000

, and then press

[ENTER]

to save.

Beeper Volume

This menu is for setting the internal beeper volume when keys

are pressed.

MENU-TIMER
BEEPER VOLUME:5

From Main Menu – [4]>[1]>[5]

Use

[↑][↓]

or the

[0]–[7]

keys to set the volume level, with 7 being the loudest setting, and

then press

[ENTER]

to save.

Setup Numeric Scoreboard Menu

This menu configures how the console will display data on a

Lane, Place, and Time numeric scoreboard.

MENU-TIMER
3-PRIMARY TIME

MENU-TIMER
4-PRECISION

MENU-TIMER
5-BEEPER VOLUME

MENU-SCOREBOARD
1-NUMERIC

From Main Menu – [4]>[2]

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды