Daktronics OMNISPORT 2000, Руководство по эксплуатации

Страница: 102 / 182

Pace Clock Mode Operation, Menus, & Settings
92
Settings
This menu prints the console’s configuration.
MENU-PRINT
PRINT SETTINGS?
From Main Menu – [3]>[3]
Press [YES] to print the settings or press [NO] to return to the Print Menu .
Setup Timer Menu
Beeper Volume
This menu is for setting the internal beeper volume when keys
are pressed.
MENU-TIMER
BEEPER VOLUME:5
From Main Menu – [4]>[1]>[1]
Use [↑][↓] or the [0]–[7] keys to set the volume level, with 7 being the loudest setting, and
then press [ENTER] to save.
Setup Numeric Scoreboard Menu
This menu configures how the console will display data on a
numeric scoreboard.
Number of Lines
This menu sets the number of lines (1-10) that the scoreboard
displays. The default is 10.
# OF LINES
LINES= ^8
From Main Menu – [4]>[2]>[1]>[1]
Press the [0]–[9] keys to enter the number of lines and then press [ENTER] to save. If
the number of active lanes in the pool is greater than the value set, the timer will
automatically page the information in place order.
Setup RTD/Matrix Scoreboard Menu
This menu configures how the console will output Real-Time
Data (RTD) to matrix displays.
RTD Offset
This menu will add an offset to the Real-Time Data (RTD)
output to the matrix display.
MENU-RTD/MATRIX
RTD OFFSET: 5K*
From Main Menu – [4]>[2]>[2]>[1]
Use [↑][↓] to toggle through the RTD offset settings ( 0K , 5K , 10K , or 15K ). Each setting adds
5000 to the original item numbers, up to 15000. The default setting is 0K (no offset).
To save the setting, press [ENTER] .
MENU-PRINT
3-SETTINGS
MENU-SETUP
1-TIMER
From Main Menu – [4]
MENU-TIMER
1-BEEPER VOLUME
MENU-SCOREBOARD
1-NUMERIC
From Main Menu – [4]>[2]
MENU-NUMERIC
1-# OF LINES
MENU-SCOREBOARD
2-RTD/MATRIX
MENU-RTD/MATRIX
1-RTD/OFFSET
From Main Menu – [4]>[2]>[2]