Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 136

Страница: 136 / 182

Track Mode Menus & Settings

126

Dimming

This menu is used to adjust the dimming (brightness) level on

scoreboards that receive Multi-drop protocol.

SCBD DIMMING
LEVEL 0-9: NONE

From Main Menu – [1]>[2] or from SCBD 2-DIMMING [ENTER]

Use the numeric keypad to select one of the values shown in

the table to the right, or use

[↑][↓]

to toggle through the levels.

To save the setting, press

[ENTER]

. To return to the

Dimming Menu

without saving, press

[CLEAR]

When to use this:

• In low light conditions the scoreboard may be too bright.
• In direct sunlight the scoreboard may need to be turned to

full bright.

Time-of-Day

This menu is used to display Time-of-Day (TOD) on the

scoreboard. Press

[YES]

to clear the scoreboard and show

Time-of-Day. Press

[NO]

to do nothing and return to the

Time-of-Day menu. Use

[↑][↓]

to toggle between 12 and 24

hour setting, and then press

[ENTER]

MENU-SCOREBOARD
DISPLAY TOD?

From Main Menu – [1]>[3] or from SCBD 3-TIME OF DAY [ENTER]

Note:

The running time must be reset before the console will display Time-of-Day on the

scoreboard.

Time-of-Day will remain on the scoreboard until:
• The start of the next race.
• The operator presses [

RESET]

a second time to re-display the current results on the

scoreboard.

• It is toggled off in the menu. When it is toggled off, the current results will go back on

the scoreboard.

When to use this:

• Any time the console is reset and the operator wants to just display Time-of-Day on

the scoreboard. This might be during a break in the meet.

Edit Menu

The

Edit Menu

allows the operator to manually edit the team

scores for display on auxiliary team score scoreboards and

edit the record times.

MENU-SCOREBOARD

2-DIMMING

From SCBD ON/OFF Menu

Dimming levels:

0 = none (full bright)

1 = 90%

2 = 80%

3 = 70%

4 = 60%

5 = 50%

6 = 40%

7 = 30%

8 = 20%

9 = 10% (dimmest)

SCBD DIMMING
LEVEL 0-9: 70%

MENU-SCOREBOARD
3-TIME OF DAY

From SCBD 2-DIMMING Menu

MENU-SCOREBOARD
FORMAT: 12 HOUR*

MENU-MAIN
2-EDIT MENU

From Main Menu – [↓]

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды