Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 104

Страница: 104 / 182

Pace Clock Mode Operation, Menus, & Settings

Use

[←][→]

to select

OMNI 2000

OMNI 6000

, or

CTS

, depending on what the meet

management software is expecting to receive, and then press

[ENTER]

to save.

Note:

Selecting Omni 6000 transmits Omni 6000 RTD item numbers on the RTD output.

Setup Printer Menu

This menu configures which printouts will be printed on the

built-in printer in the console as well as the intensity of the

print on those printouts.

Intensity

This menu sets the printer’s contrast for easy readability.

The typical level is 5.

PRINT INTENSITY
LEVEL 1-5: 5*

From Main Menu – [4]>[4]>[1]

Press the

[1]–[5]

keys to select the print intensity and press

[ENTER]

to save.

Setup Time-of-Day Menu

This menu is used to set the console’s date and time.

DATE MM/DD/YY
TOD HH:MM:SS*

From Main Menu – [4]>[5]

Press the

[0]–[9]

keys to enter the correct date and time and then press

[ENTER]

to save.

Press

[CLEAR]

twice to exit without saving and retain the previous time and date.

Setup Network Menu

This menu is used to configure various network settings for

outputting Real-Time Data (RTD) to displays.

Network Enable

This menu sets the

ETHERNET

jack output on or off. If the jack

is not needed, it can be turned OFF (default).

MENU-NETWORK
NETWORK: ON *

From Main Menu – [4]>[6]>[1]

MENU-NETWORK
NETWORK: OFF*

Use

[←][→]

to toggle between

OFF

and then press

[ENTER]

to save.

Note:

If this setting is set to

OFF

, all of the menus below will be disabled.

IP Address

This menu allows the operator to set or verify the IP address

of the console. The default setting is shown below.

1-STD* 2-CUST
192.168. 0. 55

From Main Menu – [4]>[6]>[2]

MENU-SETUP
4-PRINTER

MENU-PRINTER
1-INTENSITY

MENU-SETUP
5-TIME OF DAY

MENU-SETUP
6-NETWORK

MENU-SETUP
1-NETWORK ENABLE

MENU-NETWORK
2-IP ADDRESS

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды