Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 118

Страница: 118 / 182

Water Polo Mode Operation, Menus, & Settings

108

Scoreboard ON/OFF

This menu is used to toggle the scoreboard output ON/OFF.

SCBD IS ON

SET OFF? Y/N

From Main Menu – [1]>[1] or from SCBD ON/OFF Menu [1] or [ENTER]

If the setting is ON, data is sent to a scoreboard. If this setting is OFF, the scoreboard will

be blank until either the start of the next game, or it is turned back ON in the menu.

When to use this:

• The scoreboard is displaying false information due to equipment or operator error

and needs to be blanked.

• The error is corrected and the scoreboard output can be turned back on.

Dimming

This menu is used to adjust the dimming (brightness) level on

scoreboards that receive Multi-drop protocol.

SCBD DIMMING
LEVEL 0-9: NONE

From Main Menu – [1]>[2] or from SCBD 2-DIMMING [ENTER]

Use the numeric keypad to select one of the values shown in

the table to the right, or use

[↑][↓]

to toggle through the levels.

To save the setting, press

[ENTER]

. To return to the

Dimming Menu

without saving, press

[CLEAR]

When to use this:

• In low light conditions the scoreboard may be too bright.
• In direct sunlight the scoreboard may need to be turned to

full bright.

Time-of-Day

This menu is used to display Time-of-Day (TOD) on the

scoreboard. Press

[YES]

to clear the scoreboard and show

Time-of-Day. Press

[NO]

to do nothing and return to the

Time-of-Day menu. Use

[↑][↓]

to toggle between 12 and 24

hour setting, and then press

[ENTER]

MENU-SCOREBOARD
DISPLAY TOD?

From Main Menu – [1]>[3] or from SCBD 3-TIME OF DAY [ENTER]

Note:

The running time must be reset before the console will display Time-of-Day on the

scoreboard.

Time-of-Day will remain on the scoreboard until:
• The start of the next game.
• The operator presses [

RESET]

a second time to re-display the current results on the

scoreboard.

SCBD IS ON
SET ON? Y/N

MENU-SCOREBOARD
2-DIMMING

From SCBD ON/OFF Menu

Dimming levels:

0 = none (full bright)

1 = 90%

2 = 80%

3 = 70%

4 = 60%

5 = 50%

6 = 40%

7 = 30%

8 = 20%

9 = 10% (dimmest)

SCBD DIMMING
LEVEL 0-9: 70%

MENU-SCOREBOARD
3-TIME OF DAY

From SCBD 2-DIMMING Menu

MENU-SCOREBOARD
FORMAT: 12 HOUR*

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды