Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 95

Страница: 95 / 182

Judge Consoles

JUDGE 1

TM: 5.0 AI:

The LCD will then show the two scores and an

after they have been entered.

Two Judge Panel Operation

With two panels of judges, the first panel enters the first set of scores, and the second

panel enters the second set of scores for the routine. The prompts are shown below.

Technical Routine Operation

In a technical routine, the first panel of judges enters the

score for the execution of the routine.

JUDGE 1 OK
EXECUTION: 5.0

The

will display by the judge’s number after the score is entered.

The second panel of judges enters the score for the overall

impression of the routine.

JUDGE 6 OK
OVERALL: 5.5

The

will display by the judge number after the score is entered.

Free Routine Operation

In a free routine, the first panel of judges enters the score for

the technical merit portion of the routine.

JUDGE 1 OK
TECHNICAL: 5.0

The

will display by the judge number after the score is entered.

The second panel of judges enters the score for the artistic

impression portion of the routine.

JUDGE 6 OK
OVERALL: 5.5

Score Editing

After a score has been entered, it may be changed by pressing

[RE-ENTER/EDIT]

on the

JC-100 (or

[EDIT]

on the RC-100/RC-200). This puts the console back into the scoring mode

to allow the score to be re-entered. The score cannot be edited if the OmniSport 2000

console operator has already accepted the judge’s scores.

JUDGE 1
EXECUTION: 5.0

JUDGE 6
OVERALL: 5.5

JUDGE 1
TECHNICAL: 5.0

JUDGE 6
ARTISTIC: 5.5

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды