Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 144

Страница: 144 / 182

Track Mode Menus & Settings

134

Use

[←][→]

to toggle race logging

OFF

and then press

[ENTER]

to save.

When to use this:

• Using the

Race Log

is the most thorough way to identify issues with the system.

Daktronics recommends that the

Race Log

is always turned on.

Results

The

Results

menu selects printouts by

LANE

PLACE

order.

The results printout format is used for verification and is

usually the preference of the meet management program

operator.

MENU-PRINTER
RSLTS BY: LANE *

From Main Menu – [4]>[4]>[2]

MENU-PRINTER
RSLTS BY: PLACE*

Use

[←][→]

to select

LANE

PLACE

and then press

[ENTER]

to save.

Backups

The

Backups

menu configures whether or not backup times

will be printed with the race results. Printing backup times is

usually the preference of the meet management program

operator.

MENU-PRINTER
BACKUPS: YES*

From Main Menu – [4]>[4]>[3]

MENU-PRINTER
BACKUPS: NO *

Use

[←][→]

to select

YES

(backups enabled) or

(backups disabled) and then press

[ENTER]

to save.

Intensity

This menu sets the printer’s contrast for easy readability.

The typical level is 5.

PRINT INTENSITY
LEVEL 1-5: 5*

From Main Menu – [4]>[4]>[4]

Press the

[1]–[5]

keys to select the print intensity and press

[ENTER]

to save.

Setup Time-of-Day Menu

This menu is used to set the console’s date and time.

DATE MM/DD/YY
TOD HH:MM:SS*

From Main Menu – [4]>[5]

Press the

[0]–[9]

keys to enter the correct date and time and then press

[ENTER]

to save.

Press

[CLEAR]

twice to exit without saving and retain the previous time and date.

Setup Network Menu

This menu is used to configure various network settings for

outputting Real-Time Data (RTD) to displays and connecting

to Meet Manager software.

MENU-PRINTER
2-RESULTS

MENU-PRINTER
3-BACKUPS

MENU-PRINTER
4-INTENSITY

MENU-SETUP
5-TIME OF DAY

MENU-SETUP
6-NETWORK

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды