background image

Pace Clock Mode Operation, Menus, & Settings

86

8  Pace Clock Mode Operation, Menus, & Settings

Reference Drawings: 

Insert; LL-2581 Omni 2000, Pace Clock ............................................................

DWG-188395

The sport insert drawing is located in 

Appendix B: Sport Inserts (p.151)

. If an insert is lost 

or damaged, a copy of the insert drawing may be used until a replacement is ordered. 
Refer to 

Section 3: General Console Features & Operation (p.17)

 for information on how 

to start up the timer and use the sport insert. 

General Features

The pace clock mode serves as a workout manager. The pace clock can manage up 

to ten different simultaneous workouts. Each workout will display consecutively on the 

scoreboard’s lane 1-10. The pace clock also works with a downloaded workout from 

Hy-Tek Workout Manager. The 

J6 RESULTS PORT

 is used to download the workout. The 

OmniSport will accept 50 steps of the workout for each lane. 

Getting Started

When starting the OmniSport 2000 console, set the console 

to the pace clock mode. Refer to 

Startup (p.19)

 and press 

[ENTER]

 when the right LCD shows 

3-PACE CLOCK

The three LCDs on the OmniSport 2000 keep the operator informed during the event. 

Note the following layout of the LCDs shown in the pace clock mode: 

       1      2      3      4      5                6      7      8      9    10

 3  1  2  1  1
 *  -  *  -  -

The left and middle LCDs contain information for lanes 1-10, while the right LCD displays 

detailed information for a specific lane plus editing information when in the editing 

mode. The following table describes each symbol and function. 

Function

Location

Definition

Lane # 

# above left & middle LCDs 

Clearly identifies the lane. 

Step # 

Top row # in left and middle LCDs 

[far left – ex. 3] 

Displays which step a specific swimmer 

is performing. Up to 50 steps for each 

lane may be entered. 

Lane Activity 

Bottom row 

*

 and 

-

 in left and 

middle LCDs 

The 

-

 indicates the timer is stopped 

and the flashing 

*

 indicates the timer 

for that lane is running. 

SELECT SPORT 
3-PACE CLOCK

 1  1  1  1  1
 -  -  -  -  -

LANE 1  STEP  1
PACE 00:09  # 3

Содержание OMNISPORT 2000























































































































































































Отзывы: