Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 88

Страница: 88 / 182

Diving Mode Operation, Menus, & Settings

Setup Printer Menu

This menu configures which printouts will be printed on the

built-in printer in the console as well as the intensity of the

print on those printouts.

Dive Log

The

Dive Log

menu allows dive logging to be turned ON/

OFF. Typically the

Dive Log

is set ON.

MENU-PRINTER
DIVE LOG: ON*

From Main Menu – [4]>[4]>[1]

Use

[←][→]

to toggle dive logging

OFF

and then press

[ENTER]

to save.

When to use this:

• Using the Dive Log is the most thorough way to identify issues with the system.

Daktronics recommends that the Dive Log is always turned on. As scores are

accepted, the printer will print the results (

Figure 53

Intensity

This menu sets the printer’s contrast for easy readability.

The typical level is 5.

PRINT INTENSITY
LEVEL 1-5: 5*

From Main Menu – [4]>[4]>[2]

Press the

[1]–[5]

keys to select the print intensity and press

[ENTER]

to save.

MENU-SETUP

4-PRINTER

MENU-PRINTER
1-DIVE LOG

From Main Menu – [4]>[4]

Figure 53:

Dive Log Printout

MENU-PRINTER
2-INTENSITY

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды