Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 39

Страница: 39 / 182

Swimming Mode Operation

If the Clock Is Still Counting

When the running time is counting, press

[EDIT]

to make corrections to the times in the

current race memory. Use

[EDIT]

to insert a backup or a stopwatch time if there was a

problem with a touchpad. Distinguished from touchpad times on the LCD and printouts,

edited times indicate an “E” if manually entered or a “B” if it is a backup time.

1 2 3 4 5 6 7 8 9 10

OK OK 00 -- E
LN 6 0.00*

The top line of the left and middle LCDs display the current lane status. An arrow by the

lane also indicates which lane is currently selected for editing. The following table defines

what each symbol means.

Symbol

Definition

There is an error in the lane and the data needs to be edited.

Indicates the person in the lane has been disqualified.

Indicates an edited time.

Lane has been turned off.

All data is correct.

The bottom line of the left LCD shows the lane and time, and the center LCD shows the

backup time. The right LCD shows the options available for editing the lane times. Press

[1]

to skip to the next lane. Press

[2]

to use the backup time. Press

[3]

to edit the lanes

time. Press

[4]

to turn the lane ON/OFF.

Disqualification (DQ)

Before the meet, the timing operator should clarify with the meet referee if he/she wants

the swimmers to be disqualified on the timer. Clarification of this is important for results to

be properly ranked on the printouts and meet management software which will show as

a DQ on the scoreboard.
Press

[DQ]

(disqualification) and

[LANE ON/OFF]

for the desired lane (or press the lane

number on the numeric keypad) and press

[ENTER]

. The DQ operation is normally done

at the conclusion of the race, after the officials have ruled on the situation that caused

the swimmer to be disqualified. On exit from the DQ command, the scoreboard is

automatically updated and any subsequent printouts will show the revised placing.
The DQ operation shown on the right LCD as illustrated,

can be done at any point in the race and does not affect

arming or recording of times for the lane. Press the same

lane number again while in the DQ command to re-qualify

the swimmer and the original status indicator is returned.

^[OK OK E OK
BACKUP-- 0:00.00

1-SKIP 2-BACKUP
3-EDIT 4-ON/OFF

DISQUALIFY (DQ)
LANE NUMBER:10

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды