Daktronics OMNISPORT 2000 Скачать руководство пользователя страница 51

Страница: 51 / 182

Swimming Mode Menus & Settings

5 Swimming Mode Menus & Settings

The console saves the settings and does not need to be reconfigured once it is set. The

quickest way to confirm settings is press

[MENU]>[3]>[3]>[ENTER]

. Reconfirm the settings

before each meet by saving the printout from the previous meet.

Menu Navigation

Press

[MENU]

to access the Main Menu screen. The swimming

mode has five menus, described in following sections.

The operator may navigate through the menus using the

arrow keys or by pressing the number that precedes the

menu title. To return to the main menu at any time, press

[MENU]

twice.

• Use

[↑][↓]

to scroll through the menus. When a selection is made, press

[ENTER]

accept the menu displayed on the right LCD. Pressing an arrow is equivalent to using

a number when in menu mode.

• The second method uses numbers to go directly to a desired menu choice. Using

the

[1]–[9]

keys, enter the number sequence as shown on the

OmniSport 2000 Timing

Console Quick Reference Guide (ED-13584)

. For example, pressing

[4]>[2]>[5]

from

the main menu prompts the operator to enter a new

Arming Delay

. Daktronics

provides a laminated copy of the quick reference guide; keep it next to the console

during a meet for convenience.

Each operator will find his/her own method that works best. Remember that when using

either navigation method, pressing

[CLEAR]

at any time will go back to the previous

function or menu. Pressing the

[YES]

and

[NO]

keys is the same as

[ENTER]

and

[CLEAR]

Note:

In this manual, LCD illustrations aligned to the right indicate menu location while

the set-up actions are shown on the screens to the left. Each step is illustrated as

the console’s right LCD prompts. The keystrokes to get to the menu shown are

indicated below that menu.

Scoreboard Menu

In the

Scoreboard Menu

, the operator can turn the

scoreboard output ON or OFF, set the dimming (brightness)

level for Multi-drop displays, and display Time-of-Day on the

scoreboard.

Scoreboard ON/OFF

This menu is used to toggle the scoreboard output ON/OFF.

SCBD IS ON
SET OFF? Y/N

From Main Menu – [1]>[1] or from SCBD ON/OFF Menu [1] or [ENTER]

If the setting is ON, data is sent to a scoreboard. If this setting is OFF, the scoreboard will

be blank until either the start of the next race, or it is turned back ON in the menu.

When to use this:

• The scoreboard is displaying false information due to equipment or operator error

and needs to be blanked.

• The error is corrected and the scoreboard output can be turned back on.

MENU-MAIN
1-SCBD MENU

Main Menu Screen

MENU-SCOREBOARD
1-SCBD ON/OFF

From Main Menu – [1] or [ENTER]

SCBD IS ON
SET ON? Y/N

Содержание OMNISPORT 2000























































































































































































Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды

Daktronics OMNISPORT 2000, Руководство по эксплуатации

Результаты поиска

Содержание OMNISPORT 2000

Отзывы:

Похожие инструкции для OMNISPORT 2000

Бренды по названию

Популярные бренды