Daikin VRV X RXQ6-48ANR Series, Руководство по обслуживанию

Страница: 114 / 297

Field Settings for Outdoor Unit SiME341909EA
108 Part 5 Field Settings and Test Operation
2.3 Settings by BS Buttons
The following settings can be made using the BS buttons on the PCB.
In case of a multi outdoor system, make these settings with the master outdoor unit (settings
made with a slave unit are disabled).
 Normal mode:
 Blank: If no abnormality is detected and initialization of communication was completed.

Flashing combination of letter and number (4 digits): Error code detected by outdoor
control or trouble by communication.
 Setting mode: Used to make changes to operating status, performance settings or address
setting.

Monitor mode: Used to verify contents of settings, quantity of units, current value of some
parameters during operation of outdoor unit.
 Mode changing procedure can be selected using the MODE (BS1) button as shown
below:
MODE
BS1
SET
(TEST)
BS2
RETURN
(RESET)
BS3
Used to make
setting mode
changes. Used to make
field settings.
7 segment display (SEG1-3) BS buttons
Normal mode
Setting mode
Monitor mode
SEG1 SEG2 SEG3
Monitor mode
Press the MODE
(BS1) button once
Setting mode
Press and hold the
MODE (BS1) button
for 5 seconds or more
Press the MODE
(BS1) button once
SEG1 SEG2 SEG3 SEG1 SEG2 SEG3 SEG1 SEG2 SEG3
Normal mode