Daikin VRV X RXQ6-48ANR Series, Руководство по обслуживанию

Страница: 112 / 297

Field Settings for Outdoor Unit SiME341909EA
106 Part 5 Field Settings and Test Operation
2.2.1 DIP Switch Setting Mounting a Spare PCB
Caution:
 After replacement with spare PCB, be sure to make settings shown in the table below. The
procedure for making settings of spare PCB is different from that used for factory settings
described above. Be sure to refer to the table on the following page in order to make settings
of spare PCB after replacement.
 Enforce a re-initialization of communication: hold press button BS3 “RETURN” for minimum
5 seconds.
 After initialization, a test operation is required from outdoor unit (hold BS2 “SET” until
indication
t01 appears).
(1) Microcomputer normal monitor
This monitor blinks while in normal control, and turns ON or OFF when an error occurs.
(2) 7 segment display
· Used to check the transmission.
· Used to display the transmission state between indoor and outdoor units.
· Used to display the contents of error.
· Used to display the contents of field setting.
(3) BS button
Used to change mode.
(4) DIP switch
Used to make field settings.
(3) BS button (BS1~BS3) (2) Segment display (SEG1~SEG3)
(4)
DIP switch
(DS1-1~4)
(DS2-1~4)
(1)
Microcomputer
normal monitor
(HAP)
Connection terminal
for transmission use
ON
OFF
1 2 3 4
DS1
ON
OFF
1 2 3 4
DS2
Initial position
of DIP switches
Position
Set switch