Daikin VRV III, Руководство по обслуживанию, Страница: 463 / 567

Troubleshooting (OP: Central Remote Controller) SiUS34-801A_b
448 Troubleshooting
Troubleshooting
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.
YES
Turn ON the power supply of
the central equipment.
Replace intelligent Touch
controller.
Set the Reset switch (located
inside of equipment)
SS1 been set to the Normal
side.
Replace the central
equipment.
Correct the wiring.
Some central equipment gets
faulty. Conduct RUN/STOP
operations on every central
equipment, and then replace
the central equipment that
cannot control the indoor unit.
NO
Have power
supplies to every central
equipment been
turned ON?
Is the display of LCD OK?
NO
YES
Nothing is
displayed on the LCD by operating
intelligent Touch controller.
(
∗
1)
NO
Has the Reset
switch (located inside of
equipment) SS1 been set
to the Normal
side?
Reset the power supplies of
every central equipment.
YES
Abnormal
Were
any changes
made to the number
of units of central
equipment? (The central
equipment was connected once,
and then disconnected, or
additional central
equipment was
installed.)
NO
YES
Normal
NO
YES
Check 7
Check if the unit indicating
“A8” has no broken
of wiring.
∗
1: Display screen control using intelligent Touch controller:
When the screen displays nothing by touching the screen, adjust the contrast volume.
Check 7
: Referring to the information on P466.
∗
2
∗
2