Daikin VRV III, Руководство по обслуживанию, Страница: 289 / 567

Specifications SiUS34-801A_b
274 Indoor Unit
Slim Ceiling Mounted Duct Type
Notes:
1 Nominal cooling capacities are based on the following conditions:
Return air temperature: 80°FDB, 67°FWB
Outdoor temperature: 95°FDB
Equivalent ref. piping length: 25 ft (7.5 m) (Horizontal)
2 Nominal heating capacities are based on the following conditions:
Return air temperature: 70°FDB.
Outdoor temperature: 47°FDB, 43°FWB
Equivalent ref. piping length: 25 ft (7.5 m) (Horizontal)
3 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
4 External static pressure is changeable to change over the connectors inside electrical box, this pressure means
"High static pressure – Standard – Low static pressure".
5 Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of installation conditions.
Model FXDQ07MVJU FXDQ09MVJU FXDQ12MVJU
1 Cooling Capacity Btu/h 7,500 9,500 12,000
2 Heating Capacity Btu/h 8,500 10,500 13,500
Casing / Color Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H×W×D) in (mm)
7-7/8 × 27-9/16 × 24-7/16”
(200 x 700 x 620.7 mm)
7-7/8 × 27-9/16 × 24-7/16”
(200 x 700 x 620.7 mm)
7-7/8 × 27-9/16 × 24-7/16”
(200 x 700 x 620.7 mm)
Coil (Cross
Fin Coil)
Rows × Stages × FPI 2 × 12× 17 2 × 12× 17 3 × 12× 17
Face Area ft² 1.36 1.36 1.36
Fan
Model — — —
Type Sirocco Fan Sirocco Fan Sirocco Fan
Motor Output kW 0.06 0.06 0.06
Air Flow Rate (H/L) cfm 280/226 (H/L) 280/226 (H/L) 280/226 (H/L)
External Static Pressure 4 “wg 0.12 - 0.04 0.12 - 0.04 0.12 - 0.04
Drive Direct Drive Direct Drive Direct Drive
Temperature Control
Microprocessor Thermostat
for Cooling and Heating
Microprocessor Thermostat
for Cooling and Heating
Microprocessor Thermostat
for Cooling and Heating
Sound Absorbing Thermal Insulation Material Foamed Polyethylene Foamed Polyethylene Foamed Polyethylene
Air Filter Removal, Washable, Mildew Proof Removal, Washable, Mildew Proof Removal, Washable, Mildew Proof
Piping
Connections
Liquid Pipes in (mm)
φ
1/4” (6.4 mm) (Flare Connection)
φ
1/4” (6.4 mm) (Flare Connection)
φ
1/4” (6.4 mm) (Flare Connection)
Gas Pipes in (mm)
φ
1/2” (12.7 mm) (Flare Connection)
φ
1/2” (12.7 mm) (Flare Connection)
φ
1/2” (12.7 mm) (Flare Connection)
Drain Pipe in (mm)
VP20
(External Dia. 1-1/32” (26.2 mm)
Internal Dia. 25/32) (20 mm)
VP20
(External Dia. 1-1/32” (26.2 mm)
Internal Dia. 25/32) (20 mm)
VP20
(External Dia. 1-1/32” (26.2 mm)
Internal Dia. 25/32) (20 mm)
Machine Weight (Mass) Lbs (kg) 51 lbs (23.1 kg) 51 lbs (23.1 kg) 51 lbs (23.1 kg)
5 Sound Level (H/L) dBA 33/29 33/29 33/29
Safety Devices
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Refrigerant Control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Connectable outdoor unit R-410A Series R-410A Series R-410A Series
Standard Accessories
Operation Manual, Installation
Manual, Paper Pattern for Installation,
Drain Hose, Clamp Metal, Insulation for
Fitting, Sealing Pads, Clamps, Screws,
Washers, Conduit Mounting Plate,
Insulation Tube. Operation Manual, Installation
Manual, Paper Pattern for Installation,
Drain Hose, Clamp Metal, Insulation for
Fitting, Sealing Pads, Clamps, Screws,
Washers, Conduit Mounting Plate,
Insulation Tube. Operation Manual, Installation
Manual, Paper Pattern for Installation,
Drain Hose, Clamp Metal, Insulation for
Fitting, Sealing Pads, Clamps, Screws,
Washers, Conduit Mounting Plate,
Insulation Tube.
Drawing No. C:3D051780A