Daikin VRV III, Руководство по обслуживанию, Страница: 113 / 567

Field Settings SiUS34-801A_b
98 VRVIII R-410A Heat Pump 60Hz
There are the following three setting modes.
Setting mode 1 (H1P off)
Initial status (when normal) : Used to select the cool/heat setting. Also on during abnormal , low
noise control, and demand control .
Setting mode 2 (H1P on)
Used to modify the operating status and to set program addresses, etc. Usually used in servicing
the system.
Monitor mode (H1P blinks)
Used to check the program made in
[ Setting mode 2 ]
.
Mode changing procedure 1
Single-outdoor-unit
system
7 7 8 7 7 7 7 7
Outdoor-
multi
system
Master
7 7 8 7 7 7 7 8
Slave 1
7 7 7 7 7 7 7 9
Pushbutton switches
Used to change
the setting mode
Used for
onsite setting Used to set up address
when wiring is changed
or an indoor unit is added
Used for check operation and
test operation
MODE SET RETURN TEST
BS1 BS2 BS3 BS4 BS5
REWIRING
Setting mode 1
Monitor mode
H1P
Push the BS1(MODE button)
one time.
Blinking
MODE MODE
Off
H1P
Setting mode 2
MODE
On
H1P
Push and hold the BS1
(MODE button) for 5 seconds.
Push the BS1(MODE button) one time.
(Normal)
(V2761)
Using the MODE button, the modes can be changed as follows.