Daikin VAM-FA8VE, Технические данные инструкция

Страница: 53 / 282

• HRV • Heat Reclaim Ventilation
51
• HRV • VAM-FA8VE
1
7
7 Product Specification
7-2 Optional accessories
7-2-7 DCS302C51: Centralized control
NAMES AND FUNCTIONS OF THE
OPERATING SECTION (Fig. 1,2)
UNIFIED OPERATION BUTTON
“
No.
” DISPLAY (TIME NO.)
Press to operate all indoor units.
Displays the operation timer No. when used in
conjunction with the schedule timer.
UNIFIED STOP BUTTON “ ” DISPLAY (PRESET TEMPERATURE)
Press to stop all indoor units. Displays the preset temperature.
OPERATION LAMP (RED)
“
18
” DISPLAY
(CONTROL MODE)
Lit while any of the indoor units under control is in
operation.
Displays codes on how to control equipment
(ON/OFF control impossible by remote controller,
centralized, individual etc.).
Displays the No. of the particular unit that has
stopped due to malfunction.
“ ” DISPLAY (REFRIGERANT SYSTEM
DISPLAY)
“ ” DISPLAY
(MALFUNCTION CODE)
The indicationin the square is lit while the
refrigerant system is being displayed.
Displays the contents of a malfunction.
The lamp flashes when a malfunction stops
operation. The contents of the current malfunction
are displayed in the inspection mode.
“ ” DISPLAY
(OPERATION MONITOR)
“
TEST
” DISPLAY
(INSPECTION/TEST)
The lamp is lit while operation is being monitored.
Press the inspection/test operation button.
Either the inspection or test lamp lights up.
“ ” DISPLAY
(ZONE SETTING)
“ ” DISPLAY
(CHANGEOVER UNDER CONTROL)
The lamp is lit while setting zones.
Cool/heat selection is not possible for either the
zone or the group where this particular display
appears.
“ZONE” “GROUP” DISPLAY
(ZONES/GROUP)
“ ” DISPLAY
(UNDER HOST COMPUTER INTEGRATED
CONTROL)
Indicates the particular zone or group being
displayed. Setting is not possible while this display is being
displayed.
GROUP NO. IN OPERATION
“ ” DISPLAY
(TIME TO CLEAN)
Each square displays the state corresponding to
each group.
Displayed to notify the user it is time to clean the air
filter or air cleaner element of a particular group.
“ ” “ ” “ ” “ ” “ ” “ ”
“ ” “ ” DISPLAY (OPERATION
MODE)
Displays operating state.
(HC0160)
1 10
2 11
C
3 12
CODE
No.
4
REF.
CIRCUIT
13
5
MONITOR
14
6
ZONE
SET
15
7 16
HOST
8
17
9