Operation Manual
SiBE811120
10
Photocatalytic Air Purifier L-Series
4.2
Safety Precautions
3
Safety Precautions
Before use, read these Safety Precautions to ensure proper handling of equipment.
The precautions used in this manual are classified into the following two types. Both contain important
safety information, therefore observe them at all times.
WARNING
• Use only a 220-240V power supply.
Other power supplies may lead to fire or electric shock.
• Do not damage, remodel, bend unreasonably, pull, twist or use the
power supply cord bundled up.
Also, do not place heavy objects on or pinch the power supply cord.
Damage to the power supply cord may lead to fire or electric shock.
• Do not use the unit when the power supply cord or the power plug is
damaged or plugged loosely into an electrical socket.
A damaged or loose cord or plug may lead to fire because of a short circuit or electric shock.
• Do not use the unit beyond the rating of the electrical socket or
branching device.
Exceeding the rating of multiple socket outlets may lead to fire because of overheating.
• Do not connect or disconnect the power plug to turn the unit ON / OFF.
Abusive handling may lead to electric shock or fire because of overheating.
Improper handling may lead to serious injury or even
death.
CAUTION
Improper handling may lead to injury or property
damage.
In some situations, the consequences may be grave.
The icons used in this manual mean the following.
Never do.
Do not disassemble.
Be sure to follow the
instructions.
Disconnect the power
plug.
Keep away from
flames.
Do not wet.
Do not handle with wet
hands.
After reading this manual, keep it in a handy place for future reference by users.
WARNING
Power supply
cord and plug
Main unit
• Insert the power plug into the electrical socket all the way to the base.
Incomplete connections may lead to electric shock or fire because of overheating.
• Periodically clean the dust and other matter from the power plug with
a dry cloth.
Insulation failure caused by humidity or other factors may lead to fire.
• Stop operation and disconnect the power plug if you detect anything
strange such as burning odours.
Continued use of the unit without resolving abnormalities such as burning odours may lead to
electric shock or fire because of overheating.
Consult your dealer.
• If the power supply cord is damaged, it must be replaced by the
manufacturer, dealer or qualified persons in order to avoid a hazard.
A damaged cord may lead to electric shock or fire because of overheating.
• To reduce the risk of electric shock, this equipment has a polarized
plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact qualified personnel to install the
proper outlet. Do not alter the plug in any way.
• Before cleaning or relocating the unit, stop operation and disconnect
the power plug from the electrical socket.
Handling the unit while it is plugged in may lead to electric shock or damage.
• Do not use the unit anywhere there is airborne oil such as machine oil.
Airborne oil may lead to cracking, electric shock or ignition.
• Do not use the unit anywhere there are abundant oil vapours such as
in kitchens, combustible or corrosive gases, or metallic dust.
These kinds of environments may lead to fire or damage.
• Keep fingers and objects out of the air inlets, air outlet and other
openings.
Improper handling may lead to electric shock, injury or damage.
• Do not wet the air outlet or unit frame.
Contact with water may lead to fire or electric shock.
