p
rogram
s
eT
u
p
www.DaikinApplied.com 11
IM 1234-1 • BACNET THERMOSTAT
Entering a User Password
User functions may require a password consisting of four
numbers. Once a user password is entered it will remain active
for 60 seconds after the last button is pushed.
Table 3: Entering a User Password
Procedure
Steps
Display
Starting display
Start at the temperature display
Enter the Level 1 password
1. Press any button on the BACnet Thermostat. The display
changes to the Security User Level display.
2. Press either the
▲
or
▼
button to change the first digit of
the password.
3. Press the Enter button to select the next digit. Repeat for
all four digits.
4. If the password is correct, the display will advance to the
first menu.
Changing the Active Setpoints
To enter or change the active temperature setpoints you may
need to enter a user password.
NOTE:
In the following procedure the current active setpoint
– either cooling or heating – is the first setpoint to
change. Once that setpoint is entered, the display
advances to the next setpoint.
Table 4: Changing the Active Setpoints
Procedure
Steps
Display
Starting display
Start at the temperature display
NOTE:
The next step may require a user password.
Change the active setpoints
1. Press either the
▲
or
▼
button to change the active
temperature setpoint.
NOTE:
A user password may be required after pushing the
first button.
2. Press the Enter button to save the value. The display will
advance to the next setpoint.
3. Press the
▲
or
▼
button to change the next setpoint.
4. Press the Enter button to save the value. The display will
return to the temperature display.
