Daikin BACnet IM 1234-1 Скачать руководство пользователя страница 3

Страница: 3 / 46

nTroduCTIon

www.DaikinApplied.com

IM 1234-1 • BACNET THERMOSTAT

nTroduCTIon

Revision History

Version Number Date

Comment

IM 1234-1

December, 2014

Initial Release

Reference Documents

Number

Title

Company

Source

ED 19053 BACnet Thermostat

Daikin Applied

www.DaikinApplied.com

Limited Warranty

Consult your local Daikin Applied representative for warranty

details. To find your local Daikin Applied representative, go to

www.DaikinApplied.com

General Information

This manual provides general information about the BACnet

thermostats. The controllers are space mounted devices that

combine a BACnet controller with temperature sensors. The

controllers include programs for the following applications.

•  Roof top units, both single or multi-stage
•  Heat pumps
•  Two and four pipe fan coil units

The BACnet thermostats are native BACnet, Application

Specific Controllers. BACnet communication parameters,

device instance, MAC address, baud rate, user adjustments,

and application configuration values are set from password

protected front panel controls.
All models feature an integrated BACnet schedule and

hardware real-time clock with 72-hour capacitor backup for

standalone operation or network time synchronization.
A two-piece mechanical design, featuring a removable

backplate, facilitates easy wiring and installation.

Hazardous Information Messages

CAUTION

Cautions indicate potentially hazardous situations, which can

result in personal injury or equipment damage if not avoided.

WARNING

Warnings indicate potentially hazardous situations, which can

result in property damage, severe personal injury, or death if

not avoided.

DANGER

Dangers indicate a hazardous situation which will result in

death or serious injury if not avoided.

NOTICE

Notices give important information concerning a process,

procedure, special handling or equipment attributes.

Содержание BACnet IM 1234-1















































Результаты поиска

Содержание BACnet IM 1234-1

Отзывы:

Похожие инструкции для BACnet IM 1234-1

Бренды по названию

Популярные бренды

Daikin BACnet IM 1234-1, Руководство по установке и обслуживанию

Результаты поиска

Содержание BACnet IM 1234-1

Отзывы:

Похожие инструкции для BACnet IM 1234-1

Бренды по названию

Популярные бренды