Daedong DSC48, Руководство по ремонту

Страница: 17 / 290

Apr. 2007
0
-11
DSC48
3.3 HARVESTING
3.3.1 DRIVING ONTO AND OUT OF THE
FIELD
• Drive slowly at a right angle from a fi eld bank.
• Use ramps when there is a high fi eld bank, a ditch or
slope.
• Drive slowly while checking whether or not the bank is
collapsing.
• When driving onto the slope, drive backward.
3.3.2 OPERATION IN FIELD
417W108A
• Do not let anyone enter the fi eld or get near the com-
bine harvester when working on the field. Never let
any passenger ride on the combine harvester.
• When turning the direction, pay close attention to the
surrounding.
• When driving, do not get distracted or leave the levers
unattended.
• Do not work on a steep slope.
• Do not operate the combine harvester with fatigue.
Take a rest if necessary.
• Clay clinging to your shoes sole may result in skidding
in the brake operation which is very dangerous. Re-
move any clay on the sole before driving.
3.3.3 STORAGE AFTER DAILY WORK IS
COMPLETED
• Apply the parking brake on level ground and stop the
engine.
• Let the engine cool down before inspecting parts
around the engine.
3.4 AFTER COMPLETING INTENDED
OPERATION AND STORAGE
3.4.1 AFTER DAILY WORK IS COMPLETED
• Apply the parking brake on a level ground and pull out
the ignition key. Then cover the lock cylinder with its
cap. (Some foreign objects such as water can in
fi ltrate
into the cylinder and start the engine and cause unex-
pected problems.)
• Keep the area around the engine, battery and fuel
tank clean.
• Do not touch the muffler or radiator until they cool
down.
• When replacing a crawler, use an appropriate jack,
jack stands and secure support.
• Cover the engine for storage after it cools down.
3.4.2 LONG-TERM STORAGE
417W109A
• Disconnect the battery cables and remove the battery.
• Depress the parking brake pedal and engage the
pedal lock.
• Chock the front and behind the wheels and disengage
the parking brake.
• When disposing a part (battery, oil, etc.) or the com-
bine harvester, contact your dealer.