Daedong DSC48, Руководство по ремонту

Страница: 16 / 290

0
-10 Apr. 2007
DSC48
417W106A
3.2 DRIVING
• Make sure that the lock of the parking brake pedal is
disengaged.
• Never let any passenger ride on the combine har-
vester. Also, do not put any object on the combine
harvester.
• Make sure that anyone is around the combine har-
vester before starting off.
• Put the accelerator lever into the mid-speed range
(2,000 rpm) to drive off.
• Avoid abrupt start, stop or cornering.
• When driving, do not get distracted or leave the levers
unattended.
• When driving backward, pay attention to the rear
wheels' vicinity while remaining at low speed.
• When driving backward, the combine harvester moves
to the opposite direction of the steering lever. There-
fore, pay close attention.
3.2.1 DRIVING ON A ROAD
• Follow the traf fi c rules.
• When driving on a road, pay attention to the four di-
rections of the combine harvester and stay on a low
speed lane.
• Turn on the headlamp when driving at night.
• Don't jump on or off the combine harvester when it is
moving.
• If possible, transport the combine harvester with a
trailer.
• Make sure to turn on the turn signal light when chang-
ing a lane or cornering.
417W107A
3.2.2 DRIVING ON A NARROW RURAL
PATH, BUMPY ROAD OR SLOPE
• Remain at a low speed when driving on a narrow rural
or bumpy road.
• Do not get too close to the edge of a road to avoid ve-
hicles coming in the opposite direction.
• Do not drive on a soft edge of a road or a grass-cov-
ered shoulder.
• When climbing a slope, don't start abruptly.
• On a downhill, reduce your speed.
3.2.3 STOPPING AND PARKING
• When stopping or parking on level ground, apply
the parking brake, move the main shift lever into the
neutral position and the range shift lever into the low
speed position, and then stop the engine.
• Do not park on a slope. (If necessary, chock the
wheels)
• When getting off the combine harvester, take the key
with you from the combine harvester.
3.2.4 LOADING AND UNLOADING THE
COMBINE HARVESTER TO THE
TRANSPORTING VEHICLE
• Use ramps that are strong, wide and long (4 times
long as the height of the cargo bed of the vehicle)
enough and have anti-slippery hooks.
• Ensure the ramps are straightly lined up with the cargo
bed of the transporting vehicle and the hooks on the
ramps are securely engaged.
• Check immediate vicinity of the combine harvester for
bystanders.
• Drive the combine harvester forward at a low speed to
load it up to the transporting vehicle. Backward slowly
to unload the combine harvester from the vehicle.
• Do not operate any shift or the steering lever on the
ramps.