xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Authentication Server Host
This window will set user-defined
Authentication Server Hosts
for the TACACS / XTACACS / / RADIUS security
protocols on the Switch. When a user attempts to access the Switch with Authentication Policy enabled, the Switch will send
authentication packets to a remote TACACS / XTACACS / / RADIUS server host on a remote host. The TACACS /
XTACACS / / RADIUS server host will then verify or deny the request and return the appropriate message to the
Switch. More than one authentication protocol can be run on the same physical server host but, remember that TACACS /
XTACACS / / RADIUS are separate entities and are not compatible with each other. The maximum supported number
of server hosts is 16.
To view the following window, click
Security Management > Access Authentication Control > Authentication Server Host
:
Figure 7- 14. Authentication Server Host window
To add an Authentication Server Host, click the
Add
button, revealing the following window:
NOTE:
More than one
authentication protocol can be
run on the same physical
server host but, remember that
TACACS/XTACACS/
are separate entities and are
not compatible with each other
Figure 7- 15. Authentication Server Host Setting - Add window
Configure the following parameters to add an Authentication Server Host:
Parameter Description
IP Address
The IP address of the remote server host to add.
Protocol
The protocol used by the server host. The user may choose one of the following:
Port (1-65535)
Enter a number between 1 and 65535 to define the virtual port number of the authentication
protocol on a server host. The default port number is 49 for TACACS/XTACACS/
servers and 1813 for RADIUS servers but the user may set a unique port number for higher
security.
Timeout (1-255)
Enter the time in seconds the Switch will wait for the server host to reply to an authentication
request. The default value is 5 seconds.
Retransmit (1-255)
Enter the value in the retransmit field to change how many times the device will resend an
authentication request when the TACACS server does not respond.
Key
Authentication key to be shared with a configured or RADIUS servers only.
Specify an alphanumeric string up to 254 characters.
TACACS
- Enter this parameter if the server host utilizes the TACACS protocol.
•
•
•
•
XTACACS
- Enter this parameter if the server host utilizes the XTACACS protocol.
- Enter this parameter if the server host utilizes the protocol.
RADIUS
- Enter this parameter if the server host utilizes the RADIUS protocol.
195
Содержание TM DES-6500
