D-Link TM DES-6500, Руководство пользователя

Страница: 63 / 353

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
MSTP Port Information
This window displays the current MSTI configuration settings and can be used to update the port configuration for an MSTI ID. If
a loop occurs, the MSTP function will use the port priority to select an interface to put into the forwarding state. Set a higher
priority value for interfaces to be selected for forwarding first. In instances where the priority value is identical, the MSTP
function will implement the lowest port number into the forwarding state and other interfaces will be blocked. Remember that
lower priority values mean higher priorities for forwarding packets.
To view the following window, click Configuration > Spanning Tree > MSTI Port Information :
Figure 6- 21. MSTP Port Information window
To view the MSTI settings for a particular port, select the Port number, located in the top left hand corner of the screen and click
Apply . To modify the settings for a particular MSTI Instance , click on its hyperlinked MSTI ID, which will reveal the following
window.
Figure 6- 22. MSTI Settings window
Parameter Description
Instance ID Displays the MSTI ID of the instance being configured. An entry of 0 in this field represents the
CIST (default MSTI).
Internal cost This parameter is set to represent the relative cost of forwarding packets to specified ports
when an interface is selected within a STP instance. The default setting is 0 (auto). There are
two options:
•
•
0 (auto) - Selecting this parameter for the internalCost will set quickest route automatically
and optimally for an interface. The default value is derived from the media speed of the
interface.
value 1-2000000 - Selecting this parameter with a value in the range of 1-2000000 will set
the quickest route when a loop occurs. A lower Internal cost represents a quicker
transmission.
Priority Enter a value between 0 and 240 to set the priority for the port interface. A higher priority will
designate the interface to forward packets first. A lower number denotes a higher priority. This
entry must be divisible by 16. The default priority setting is 128.
Click Apply to implement changes made.
48