xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
OSPF General Settings
The
OSPF General Settings
menu allows OSPF to be enabled or disabled on the Switch
−
without changing the Switch’s OSPF
configuration.
To view the following window, click
Configuration > Layer 3 IP Networking > OSPF > General
. To enable OSPF, first supply
an
OSPF Route ID
(see below), select
Enabled
from the
State
drop-down menu and click the
Apply
button.
Figure 6- 132. OSPF General Settings window
The following parameters are used for general OSPF configuration:
Parameter
Description
OSPF Route ID
A 32-bit number (in the same format as an IP address
−
xxx.xxx.xxx.xxx) that uniquely
identifies the Switch in the OSPF domain. It is common to assign the highest IP address
assigned to the Switch (router). In this case, it would be 10.53.13.189, but any unique 32-bit
number will do. If 0.0.0.0 is entered, the highest IP address assigned to the Switch will
become the OSPF Route ID.
Current Route ID
Displays the OSPF Route ID currently in use by the Switch. This Route ID is displayed as a
convenience to the user when changing the Switch’s OSPF Route ID.
State
Allows OSPF to be enabled or disabled globally on the Switch without changing the OSPF
configuration.
OSPF Area ID Settings
This menu allows the configuration of OSPF Area IDs and to designate these areas as either
Normal
or
Stub
. Normal OSPF areas
allow Link-State Database (LSDB) advertisements of routes to networks that are external to the area. Stub areas do not allow the
LSDB advertisement of external routes. Stub areas use a default summary external route (0.0.0.0 or Area 0) to reach external
destinations.
To set up an OSPF area configuration click
Configuration > Layer 3 IP Networking > OSPF > OSPF Area ID Settings
link to
open the following dialog box:
Figure 6- 133. OSPF Area Settings and Table window
To add an OSPF Area to the table, type a unique
Area ID
(see below) select the
Type
from the drop-down menu. For a Stub type,
choose
Enabled
or
Disabled
from the
Stub Import Summary LSA
drop-down menu and determine the
Stub Default Cost
. Click
the
Add/Modify
button to add the area ID set to the table. To remove an Area ID configuration set, simply click
in the
Delete
column for the configuration.
To change an existing set in the list, type the
Area ID
of the set you want to change, make the changes and click the
Add/Modify
button. The modified OSPF area ID will appear in the table.
153
Содержание TM DES-6500
