manualshive.com logo in svg

D-Link TM DES-6500, Руководство пользователя

D-Link TM DES-6500 - это сетевой коммутатор с расширенными функциями управления. Скачайте бесплатно Руководство по командной строке на manualshive.com для дополнительной информации о настройке и использовании этого устройства. Получите доступ к полному руководству в любое время для успешной работы с продуктом.

Поделиться
Скачать
background image

 

to D-Link.  The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.  

Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight 

collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. 

 
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA 

number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges 

for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective 

or non-conforming. 

 
What Is Not Covered: 

The Limited Warranty provided herein by D-Link does not cover: Products that, in D-Link’s judgment, have been subjected to 

abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that 

is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; 

Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for 

the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;  Any 

hardware, software, firmware or other products or services provided  by anyone other than D-Link; and Products that have been purchased from 

inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation 

pertaining to the product.  While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you 

use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty. 

 
Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” 

WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY 

TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. 

EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, 

SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. 

 
Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, 

STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR 

DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, 

DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, 

FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF 

INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY 

SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF 

THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A 

BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-

CONFORMING PRODUCT.  THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE 

PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND 

ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. 

 
Governing Law

:  This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of 

incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not 

apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.   

 

Trademarks:

   

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their 

respective owners.

 

 

 

Copyright Statement:

  No part of this publication or documentation accompanying this product may be reproduced in any form or 

by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link 
Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto.  
Contents are subject to change without prior notice.  Copyright 2004 by D-Link Corporation/D-Link Systems, Inc. All rights 
reserved. 

 

CE Mark Warning:

  

This is a Class A product. In a residential environment, this product may cause radio interference, in which case the user may 

be required to take adequate measures. 

 

FCC Statement:

 

 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference 
will not occur in a particular installation. Operation of this equipment in a residential environment is likely to cause harmful 
interference to radio or television reception.  If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

Содержание TM DES-6500


































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TM DES-6500

IBM 51 Troubleshooting Manual preview
51
Бренд: IBM Страницы: 248
NavigateWorx NR300 User Manual preview
NR300
Бренд: NavigateWorx Страницы: 71
EMCIS LISN User'S Operating Manual preview
LISN
Бренд: EMCIS Страницы: 14
IBM System Storage DS3200 Overview preview
System Storage DS3200
Бренд: IBM Страницы: 2
axing EOC 1-31 Operation Instructions Manual preview
EOC 1-31
Бренд: axing Страницы: 52
Dialogic Media Board D/120JCT-LS-EW Installation Manual preview
Media Board D/120JCT-LS-EW
Бренд: Dialogic Страницы: 2
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Бренд: UfiSpace Страницы: 34
AOpen ISDN SOHO Router User Manual preview
ISDN SOHO Router
Бренд: AOpen Страницы: 89
Quidway S3000-EI Series Operation Manual preview
S3000-EI Series
Бренд: Quidway Страницы: 16
LaView LV-KN series Quick Start Manual preview
LV-KN series
Бренд: LaView Страницы: 2
NetComm Dynalink MyZone 3G24W Remote Administration Setup preview
Dynalink MyZone 3G24W
Бренд: NetComm Страницы: 5
Amer.com 8-Port 10/100Mbps Fast Ethernet Switch User Manual preview
8-Port 10/100Mbps Fast Ethernet Switch
Бренд: Amer.com Страницы: 14
Perle IRG5540 Quick Start Manual preview
IRG5540
Бренд: Perle Страницы: 4
Intellinet 561044 Instructions Manual preview
561044
Бренд: Intellinet Страницы: 12
Intercel eSAM AK-SM 800 User Manual preview
eSAM AK-SM 800
Бренд: Intercel Страницы: 17
H3C CR16000-M Installation, Quick Start preview
CR16000-M
Бренд: H3C Страницы: 4
VAMISOUND Schoeps electret Building Instructions preview
Schoeps electret
Бренд: VAMISOUND Страницы: 15
Radionics D6600 NetCom System Manual preview
D6600 NetCom
Бренд: Radionics Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды