xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
queue specified previously by the user.
Replace priority with
−
Click the corresponding box to re-write the 802.1p default priority of a
packet to the value entered in the
Priority
field, which meets the criteria specified previously in
this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will
have its incoming 802.1p user priority re-written to its original value before being forwarded by
the Switch.
For more information on priority queues, CoS queues and mapping for 802.1p, see the
QoS
section of this manual.
Replace Dscp (0-
63)
Select this option to instruct the Switch to replace the DSCP value (in a packet that meets the
selected criteria) with the value entered in the adjacent field.
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Source IP
Source IP Address - Enter an IP Address mask for the source IP address.
Destination IP
Destination IP Address- Enter an IP Address mask for the destination IP address.
Dscp (0-63)
This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header and use this as the criterion,
or part of the criterion for forwarding. The user may choose a value between 0 and 63.
Protocol
This field allows the user to modify the protocol used to configure the
Access Rule Table;
depending on which protocol the user has chosen in the
Access Profile Table
.
Port
The Access Rule may be configured on a per-port basis by entering the port number of the line
card in the chassis into this field. The port list is specified by listing the lowest line card number
and the beginning port number on that line card, separated by a colon. Then the highest line
card number, and the highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated by a dash. For example,
1:3 specifies line card number 1, port 3. 2:4 specifies line card number 2, port 4. 1:3 - 2:4
specifies all of the ports between line card 1, port 3 and line card 2, port 4
−
in numerical order.
Entering
all
will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click
in the
Access Rule Table
to view the following screen:
Figure 6- 64. Access Rule Display window (IP)
To configure the Access Rule for
Packet Content Mask
, open the
Access Profile Table
and click
Modify
for a
Packet Content
Mask
entry. This will open the following screen:
94
Содержание TM DES-6500
