D-Link TM DES-6500, Руководство пользователя

Страница: 226 / 353

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
SNMP Host Table
Use the SNMP Host Table to set up SNMP trap recipients. Open the SNMP Manager folder and click on the SNMP Host Table
link. This will open the SNMP Host Table page, as shown below.
To delete an existing SNMP Host Table entry, click the corresponding under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the blue link for the entry under the Host IP
Address heading.
Figure 8 - 11. SNMP Host Table
To add a new entry to the Switch's SNMP Host Table , click the Add button in the upper left-hand corner of the page. This will
open the SNMP Host Table Configuration page, as shown below.
Figure 8 - 12. SNMP Host Table Configuration window
The following parameters can set:
Parameter Description
Host IP Address Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Type in the community string or SNMP V3 user name as appropriate. Community String or
SNMP V3 User Name
To implement your new settings, click Apply. To return to the SNMP Host Table , click the Show All SNMP Host Table Entries
link.
211