xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Parameters Description
Profile ID
This is the identifier number for this profile set.
Mode
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify that packets that match the access profile are not forwarded by the
Switch and will be filtered.
Access ID
Type in a unique identifier number for this access and priority. This value can be set from 1 -
100.
Type
Selected profile based on Ethernet (MAC Address), IP address or Packet Content.
•
•
•
Ethernet
instructs the Switch to examine the layer 2 part of each packet header.
IP
instructs the Switch to examine the IP address in each frame's header.
Packet Content Mask
instructs the Switch to examine the packet header.
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Source MAC
Source MAC Address - Enter a MAC Address for the source MAC address.
Destination MAC
Destination MAC Address - Enter a MAC Address mask for the destination MAC address.
Ethernet Type
Specifies that the access profile will apply only to packets with this hexadecimal 802.1Q
Ethernet type value (hex 0x0-0xffff) in the packet header. The Ethernet type value may be
set in the form: hex 0x0-0xffff, which means the user may choose any combination of letters
and numbers ranging from a-f and from 0-9999.
Port
The Access Rule may be configured on a per-port basis by entering the port number of the
line card in the chassis into this field. The port list is specified by listing the lowest line card
number and the beginning port number on that line card, separated by a colon. Then the
highest line card number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are separated by a dash.
For example, 1:3 specifies line card number 1, port 3. 2:4 specifies line card number 2, port
4. 1:3 - 2:4 specifies all of the ports between line card 1, port 3 and switch 2, port 4
−
in
numerical order. Entering
all
will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click
in the
Access Rule Table
to view the following screen:
Figure 6- 79. CPU Interface Filtering Rule Display – Ethernet
104
Содержание TM DES-6500
