xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Save Configuration
The xStack DES-6500 chassis switch has two levels of memory, normal RAM and non-volatile or NV-RAM. Configuration
changes are made effective clicking the
Apply
button
.
When this is done, the settings will be immediately applied to the switching
software in RAM, and will immediately take effect.
Some settings, though, require you to restart the Switch before they will take effect. Restarting the Switch erases all settings in
RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting changes to NV-RAM before
rebooting the switch.
To retain any configuration changes permanently, click on the
Save
button in the
Save Changes
page, as shown below.
Figure 10- 7. Save Changes screen
Reset
The
Reset
function has several options when resetting the Switch. Some of the current configuration parameters can be retained
while resetting all other configuration parameters to their factory defaults.
NOTE:
Only the
Reset System
option will enter the factory default parameters into the
Switch’s non-volatile RAM, and then restart the Switch. All other options enter the factory
defaults into the current configuration, but do not save this configuration.
Reset System
will
return the Switch’s configuration to the state it was when it left the factory
Figure 10- 8. Factory Reset to Default Value window
Reboot Device
The following menu is used to restart the Switch.
Figure 10- 9. Reboot System window
260
Содержание TM DES-6500
